U-40 Cork Seal

Seals cork against dirt and oils.  
Toughens the cork, reducing
chipping and cork degradation.  
Simple brush on application
.
$6.00
Colored Burl Cork Rings
Blue, Brown, Green & Red
1-1/4" X 1/2" X 1/4" Bore
$1.25 ea.
COLOR
 
Blue
Brown
Green
Red
FUJI Custom Cork!
Pre-Formed Fore Grips
Grade A cork CONTOURED rear grips
Super Grade  STRAIGHT rear grips. Great for
Spinning!
Item #
Length
O.D.
I.D.
Butt Cap
Tenon O.D.
PRICE
 
F3TA-.250
3"
.99"
..250"
.765
$5.79
R7A-340
7"
1"
.340"
.765"
$14.99
R9A-340
9"
1"
.340"
.765"
$14.99
R10A-340
10"
1"
.340"
.765"
$16.69
R14A-340
13-3/4"
1"
.340"
.765"
$24.69
Item #
Length
O.D.
I.D.
PRICE
 
RG4S-250
4"
.875"
.250"
$6.45
RG7S-250
7"
.96"
.250"
$11.95
RG10S-250
10"
1.10"
.250"
$16.00
BCS20 1" long butt cap for .750"-.765" tenons
$0.79 ea.
BCS25 1" long butt cap for .875"-1" tenons
$0.79 ea.
Fuji 8-1/2" Rear Spinning Grip for IPS Reel Seats
Grade A grip with ID of 7.54 mm/.296".  For use with Fuji's "IPS"
series reel seats.
Grade A and Super Grade Cork TAPERED Foregrips
Item #
Length
O.D.
I.D.
PRICE
 
F15A-250
1-1/2"
1"
.185"
$3.09
F25S-250
Super Grade
2-1/2"
1"
.250"
$4.89
FG-S-25-.250
Super Grade
2-1/2"
1.13"
.250"
$5.50
F35A-250
3-1/2"
1"
.250"
$6.49
F5A-500
5"
1.125"
.500"
$9.50
Fuji IPS Seat Cork Adapter
This grade A cork adapter allows you to build your own cork
handle around Fuji's "IPS" series reel seats.
$5.35 ea.
Cork Fly Rod Grips
and Fighting Butts
Cork Grips & Handle Kits
ACIDROD.COM
The online home of
C & M Custom Tackle
Colored Burl Thin Cork Rings
Blue, Brown, Green & Red
1-1/4" X 1/4" X 1/4" Bore
$0.85 ea.
COLOR
 
Blue
Brown
Green
Red
Rubberized Cork Caps
1-1/4" X 1/2" No Hole
$1.47 ea.
$15.15 ea.
NEW!    Flex Coat "New Concept" Cork Drills
Big, BIG  time saver!  This 16" Speedbore Bit has been
modified to cut cork by using the BACK side of the bit.  
The 1/4" shaft is inserted through a pre-formed cork
grip's bore and then inserted into the drill's chuck.  By
pulling the drill back through the grip, it is re-bored in
one quick motion rather than reaming the OLD way!  
Available in three sizes.
Flex Coat's Cork Lathe allows you to shape your cork grips ON the rod, rather
than having to build and shape them on a mandrel!  Unique design powers up
your blank by coupling YOUR variable speed drill to your blank's I.D.  Set-up
includes motor stand with motor clamps and 2 sets of roller supports. Adapts to
almost any hand drill. Sturdy, commercial duty. This lathe is fantastic for shaping
cork and foam grips. Use with YOUR  variable speed hand drill.  
Flex Coat Cork Lathe
1/2"
5/8"
$198.26
All Sizes $24.00
3/8"
Rubberized Cork Rings
1-1/4" X 1/2" X 1/4" Bore
$1.71 ea.
Burnt Burl Cork Rings
1-1/4" Dia X  1/4" Bore
1/4" Thick
$0.60
1/2" Thick
$1.20
Speckled "Cheetah"
Cork Rings
Cork/Rubber composite
1-1/4" X 1/2" X 1/4" Bore
$1.60 ea.
Click Photos To Enlarge
Click here for fly rod grips
Weighted Butt Caps
Clear Protective Shrink Tube
Click Photos To Enlarge
15" Grade A Portuguese Cork
Large Diameter Saltwater / Musky Grips
1-1/4" O.D.  .575" I.D.  15" O.A.L. (14" to tenon)  
1'X1" Butt Cap tenon accepts any 25mm cap
$37.00
ITEM #
FOREGRIP
REAR GRIP
REEL SEAT
PRICE
 
HK-10
1-1/2"
7" X 1" O.D.
16mm Trigger
$28.17
HK-11
2.5"
9" X 1" O.D.
16mm Trigger
$31.19
HK-12
2.5"
14" X 1" O.D.
17mm Trigger
$37.86
HK-13
3.5"
15" X 1-1/4" O.D.
18mm Trigger
$49.97
Casting / Trigger
Handle Kits
ITEM #
FOREGRIP
REAR GRIP
REEL SEAT
PRICE
 
#5
1-1/2"
3" X 1" O.D.
16mm Spin
$19.21
#6
2.5"
7" X 1" O.D.
16mm Spin
$27.73
#7
2.5"
9" X 1" O.D.
17mm Spin
$29.06
#8
2.5"
12" X 1" O.D.
17mm Spin
$32.79
Spin / Spin Cast
Handle Kits
BGV93516C
For VSSM16 Seats
9-3/8" length
5/16" inside diameter
$14.70
BGV97517C
For VSSM17 Seats
9-3/4" length
5/16" inside diameter
$14.70
Use with 3/4" I.D. butt caps
Available
HERE
Fuji Rear Spinning Grips for VSS Reel Seats
Home > Grips/Buttcaps > Cork
Great For Rail Rod Grips!
Rubberized Cork Rings
Cork/Rubber composite
1-1/2" X 1/2" X 1/4" Bore
$1.65 ea.
1/4" X 1/2" Plugs
Used to plug the 1/4" center
hole when using a butt cap
$0.20 ea.
Brownie Burl Cork Rings
1-1/4" Dia X  1/4" Bore
1/2" Thick
$1.20
Streaker Burl Cork Rings
1-1/4" Dia X  1/4" Bore
1/2" Thick
$1.20
Fuji Cork Foregrip with Rubberized Trim
2" Length 250" ID. 1" Diameter Tapers to 5/8"
$4.59   
FGS2RC
Fuji Split Grip perfect for  ACSM/ECSM
Seats
3-1/2" length .250" I.D.
$7.69
BGA95RC
Fuji RGK Cork Fore Grips with Rubberized Trim.
Available to accommodate both 16 and 17 mm
Spinning OR Casting,  Works Perfectly with Fuji
Skeleton Seats.
RGK6016RC     $5.29


RGK6517RC     $5.59
Fuji "Nubbin" Foregrip. 1-1/4" Length .250"
I.D. 7/8" O.D. Available for size 16 and
17mm threaded Barrel

$3.90 either size
Size 16
Size 17
Fuji 'Mini' Butt Grip perfect addition for a split grip,
narrow end.  Used for diameters less than .50"
Diameter. 1-5/8"  length   "Pic is a 16mm Barrel"
BGKSC
Fuji Standard Butt Grip good for blanks up
to 5/8" diameter. 1-7/8" length. 19mm
Diameter, narrow end.      
BGK485C
Fuji Extended Butt Grip for blanks up to 5/8"
diameter 2.5" length 19mm diameter, narrow end
BGS65RC      $6.15        
         
Large Diameter Cork Foregrip and
Rear Grip.

Both 5" in length.  

<-- Tapered Foregrip:  O.D. of 1.26"  I.D. of .575"

Rear: O.D. 1.28"  I.D. .625"  -->
Foregrip

$9.49
Rear Grip

$9.99
Use with BCS25 Butt Cap *Below*
Fuji BGA11C
Multi-Use Casting Handle for use with ACSM, ECSM and TCSM Trigger Seats.  Cork is 11" in Length I.D. .320"   
O.D.  1.11" (Front) and 1.13" (Rear)  Tenon Will Accept BCS20; EVABC or RBC1720 (Cork
Composite)
$15.39 ea.
$3.19 ea.
RBC1720
Click pictures to Englarge
Aluminum Spin RIngs
26mm ID for 1" O.D. Tennessee Grip
$3.99 - Pair (2)
Nylon Graphite Spin RIngs
26mm ID for 1" O.D. Tennessee Grip
$2.49 - Pair (2)
10" Grade A 2 pc 'Split Grip' Tennessee Grip
25.4mm/1" O.D.    6.6mm/0.26" Bore
$18.39
Tennessee Spinning Grip & RIngs
BGA95RC
FGS2RC
$4.19
$5.29
BGS65C
$6.15
BGA11C
Convertable Cork Ring  &
Grip Clamp
Convertible clamp allows you to glue up grips under 10-1/2" without
having to run wing nuts the length of the rods.  Can be used to glue &
clamp cork rings either on the blank or on a mandrel as large as 3/4"
O.D.   Max working length (between blocks) 22".
$21.90
Speckled "Cheetah"
Cork Rings
Cork/Rubber composite
1-1/4" X 1/2" X NO Bore
$1.60 ea.
Spotted Dalmation Cork Rings
1-1/4" X 1/2" X 1/4" Bore-Thick
1-1/4" X 1/4" X 1/4" Bore-Thin
$1.20                              $.94
Fuji IPS Spinning Handle Kit

Includes:

1-FGH25C        Cork Foregrip
1-HPS16N         Quick Lock Foregrip
1-IPSM16/B       Reel seat Body
2-NSA               16mm Arbors
1-BGS8514C    Cork Buttgrips
1-ERC23           Butt Cap
$29.45
CRB Handle Clamp
Simply place your rod's butt end in the PVC end cap and stretch the securing disc to the end
of the foregrip or winding check... leave it on your rod to cure overnight for tighter handles!
$15.95
Medium Burnt Cork Rings
1-1/4" Dia X  1/4" Bore
1/2" Thick
$1.05
Light Burnt Cork Rings
1-1/4" Dia X  1/4" Bore
1/2" Thick
$1.05
Swurl Burl Cork Rings
1-1/4" X 1/2" X 1/4" Bore
$1.25 ea.
**Limited quantity**  When they are
gone, they are gone.
Natural Cork Rings Gr A
1-1/4" Dia X  1/4" Bore
1/2" Thick
These rings will compliment the custom handle
you're making.  It also matches other cork rings we
offer, with more of a natural look instead of a
'bleached' look.
$1.85
Natural Cork Rings Flor
1-1/4" Dia X  1/4" Bore
1/2" Thick
$3.00
Pre-Formed Rear Grips
Cork Composite CBC-4
Fits RG4S
$2.50
Cork Composite  CBC-3
Fits RG7S
$2.50
Cork Composite  CBC-2
Fits RG10S
$2.50
Eva EBC-4
Fits RG4S
$2.00
Eva EBC-3
Fits RG7S
$2.00
Eva EBC-2
Fits RG10S
$2.00
Cork Composite/Eva caps for above RG cork grips.
BCS25 1" long butt cap for .875"-1" tenons
$0.79 ea.
Front Split Grip
Front split grip, 1.25" long. Fits flush against the rear of
standard size 16 spinning seats. Inside diameter is .375"
$2.65
Large Diameter Super Grade Straight Rear Grips
Length
O.D.
I.D.
Price
 
10"
1.250"
.500"
$17.00
12"
1.250"
.500"
$20.00
14"
1.250"
.500"
$23.00
Split Grip Deluxe Spinning Handle Kit
Kit includes:

16mm Amtak spinning seat
2" Butt Grip .250" ID
2" Rear Grip .250" ID
2" Foregrip .250" ID
Various size rubber winding checks
Reel seat arbor
Rubber butt plug
$23.75
Split Grip Deluxe Casting Handle Kit
Kit includes:

16 deluxe casting seat
Arbor
1.5" Butt Grip .360" ID *Eva bottom
3.8" Rear Grip .300" ID
1.25" Foregrip .375" ID
Various size rubber winding checks
$21.85
Pistol Grip Casting Handle Kit
Kit includes:

16 CRB casting seat
5" Super Grade Cork
2" Fore Grip .250" ID
Various size rubber winding checks
$28.78
10" Grade A 1 pc 'Light Spinning' Tennessee Grip
23.11mm/0.91" O.D.  5.08mm/0.2" Bore
$14.49
MS10A-260
LS10A-200
Aluminum Spin RIngs
24mm ID for 1" O.D. Tennessee Grip
$3.99 - Pair (2)
Nylon Graphite Spin RIngs
24mm ID for 1" O.D. Tennessee Grip
$2.49 - Pair (2)
Pac Bay recommends using the size 24 on
the 1 piece handle Light Spinning Grip and
size 26 on the 2pc Split Grip
BGA95RC
BGS65C              RGK6016RC
Nubbin
BGKSC
BGS65C