8-1/2" X 11" Waterslide Decal Sheets for Laser or Alps Printers
$6.99
Three Sheets of Laser Waterslide paper. This is the same material that you used to use putting printed decals on plastic car models. Dip them in water and slide them off the backing. MUCH nicer than peel & sticks for rod inscriptions as they're much thinner and MUCH easier to push air bubbles out from under before they set up. You can use these 8-1/2" X 11"sheets to print any color decal that your printer will print in. The decal material itself is clear on a light blue backer paper to help see light colors such as white. After application, simply coat with your usual rod finish and you're done!
8-1/2" X 11" Waterslide Decal Sheets for InkJet Printers
$6.99
Three Sheets of InkJet Waterslide paper. This is the same material that you used to use putting printed decals on plastic car models. Dip them in water and slide them off the backing. MUCH nicer than peel & sticks for rod inscriptions as they're much thinner and MUCH easier to push air bubbles out from under before they set up. You can use these 8-1/2" X 11"sheets to print any color decal that your printer will print in. The decal material itself is clear. After application, simply coat with your usual rod finish and you're done!
Micro Set Decal Setting Solution
$7.99
"Micro Set" solution is brushed on the rod (either blank or finished butt wrap) before decal application to allow easier positioning of the decal (helps it slide) as well as providing better decal adhesion. Micro Set can also be used as a decal remover to remove decals prior to coating with rod finish.
Micro Sol Decal Setting Solution
$7.99
"Micro Sol" is a decal softener that is brushed on after decal application and helps decals conform to irregular surfaces for a "painted on" look by making the decal's edges "lay down" and remain stuck to the blank when the rod finish is applied.
Waterslide Decals & Supplies
ACIDROD.COM
The online home of
C & M Custom Tackle
Home > Decals > Waterslides